The attachment software is for canceling the standby of LP-42X

LP_43_2_J_E08_20240926_V3.rar

Please prepare a USB stick ( FAT system); Prepare the USB stick: Use an empty USB stick, put 1~2 MP3 tunes in it, and then put the attached software into the USB stick. (note that you don't need to change any name)

Follow the steps below to upgrade:
1. Plug the stereo into AC power, and turn it on. 2.
2. Plug in the USB stick (unzip the upgrade software into the USB stick)
3. Do not move any button when you see the USB flash drive is reading the audio, the upgrade will automatically shut down (into standby red light)
4. Turn off the power switch, and then turn on the power to boot, the audio upgrade is completed